Nady Audio SMPS -1X Phantom Power, Upgrade Your Sound On DSLR

Amazon Support http://amazon.techstevehd.com
New Youtube Channel http://youtube.com/techstevehd
Website http://techstevehd.com
Social Media @techstevehd
Nady Audio SMPS -1X Phantom Power, Upgrade Your Sound On DSLR

Subscribe, Like & Share – See You On The Next Video!

Music Source: None

Playlist
https://www.youtube.com/playlist?list=PLes1slIzAYk0_5ekyxEJccxELw8OK63Ko

(Visited 3 times, 1 visits today)

You might be interested in

Comment (89)

  1. Damn it's sounded better without the phantom power. The Nady SMPS is a cheap ass choice and the quality of output sound shows. Better off just using that DSLR mic in the beginning tbh. I make music myself and started with a Nady Audio phantom box……what a bad first option from trying to save a little money. The more money you spend on gear is truly heard I've learned.

  2. Say if you had a xlr to usb cable and you plugged it into a desktop pc would that work? thanks for the video I need to know as I don't want to spend extra money on a phantom.

  3. so i have a bm 100fx condenser mic with a laptop and i need to purchase a 48v power phantom are u sure that's all i need ? or do i need a sound card aswell

  4. umm.. quick question mr.TechSteveSD.. instead of using the XLR usb cable from the phantom power supply to a laptop, could I use the XLR 3.5 mm jack on the laptop? will it work?

  5. So, in order for my AKG mic to work on my mac book I need to supply it with phantom power? I bought a Nady XLR to USB cable and was wondering why it wouldn't work. I thought that the cable would take power from the laptop and send it to the mic with no problem. I guess its not that simple. So I need to also buy a phantom power supply?

  6. This video is to my opinion missing some essential connecting issues when working with XLR and (stereo)(mini)jack.

    1. Connecting a BALANCED microphone to an UNBALANCED input.
    2. The pre-amp situation.

    A Phantom power device does nothing more then powering a condensor
    microphone which does not have a battery power possibilty. Ussualy this is used when people want to avoid using a mixer. However the mixer does more then offering phantom power via XLR.

    In the video it seems like there is not much difference in
    converting from the phantom-output to the camera or to a mixer. Although
    in a mixer there is an "unbalance" converter + a pre-amp when you
    connect an xlr. Also the xlr to usb seems like a cable but my guess is
    that this is a cable with somehow a build-in soundcard(AD-converter +
    pre-amp) as USB is not for analog sound transport. Also the cable that
    showd a female-xlr to a stereo mini-jack can in reality not be hooked
    from a microphone(thrugh phantom) to a camera as the camera expects
    (stereo) left and right and ground and that is not what a balanced
    microphone offers through XLR. The high distortions one can hear in this video when
    connecting a balanced microphone output into a stereo-camera-input is
    most likely caused by the balanced mono signal coming from the
    microphone (through the pre-amp). a balanced microphone signal uses 3
    wires. 1 for positive signal, one for opposite negative signal and one
    for ground.
    That all aside there is one other issue to take in account.
    Sometimes phantom power is not shielded off.For instance if you direct a
    headphone out into a xlr input of a mixer. (with phantom power switched
    on) In that case one can seriously damage the laptop or camera or
    whatever source. So PLEASE PLEASE be carefull with (mini)jack
    converting to- and from XLR. It is NOT just another plug.

    The article in the link below shows the DIY schematics for simple connecting xlr microphones to a camera or other stereo-(mini)jack input. If this is to complicated then use a mixer or buy a microphone with an unbalanced out (jack) and battery powered phantom or a dynamic stereo mic for camera's (low end)
    http://beat-net.blogspot.nl/2011/09/millenium-pp2b-mod.html

  7. Hey just so I am understanding this correctly:

    I've got a NW-700 condenser microphone, XLR to XLR on the input for Nady Audio SMPS-1X, and an XLR to 3.5mm in the output, which is plugged into the microphone slot on my computer's internal PCIe sound card (Creative Sound Blaster Z). Do I need to instead do a XLR to USB to have this work on the computer?

  8. it just come with tha box it doesn't come with tha XLR cable to have for tha output and if u take ur cable frm ur mic and u use it on tha mic part how is tha mic suppose 2 work ?

  9. I'd like to ask. is the difference noticable if you use an XLR to USB instead of 3.5 mm and can you just connect your phantom power to usb port without making it go through an audio inteface? Like, Mic straight to phantom power straight to usb port

Comments

This site uses Akismet to reduce spam. Learn how your comment data is processed.

%d bloggers like this: